Terastation quick setup – Buffalo Technology TeraStation HS-DTGL/R5 User Manual

Page 6

Text mode
Original mode

Make sure that the power

switch. on. the. rear. of. the.
TeraStation. is. in. the. ON.
position, with the “I” symbol
pressed down.

TeraStation Quick Setup

Press. the. power button. on. the.
front panel. The LED’s will swirl
as your TeraStation boots up.

After your TeraStation has completed booting up and the LED’s have

ceased to swirl, check the LINK/ACT LED.on.the.front.of.the.TeraStation...
If it’s lit, then your TeraStation is connected properly, and you can go on
to page 8. If it’s not lit, turn to page 7 for troubleshooting.