Neff B16P52N3GB - Manual (Page 9)

9
Setting the clock
Note: When you press the KJ clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
1. Briefly press the KJ clock function button to go to the
setting mode.
The
KJ and 3 symbols light up. ‚ƒ : ‹‹ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the KJ clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove the accessories from the cooking compartment.
2. Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4. Heat with % Top/bottom heat at 240 °C for 60 minutes.
5. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode appears on the text display.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
The appliance begins heating.
Notes
■
The / Slow cook, é Steam cooking and ê Dough proving
operating modes can only be started if neither • nor œ is
displayed in the temperature display.
■
If no default temperature is displayed, the temperature for
your selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the
± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm® 160 40 - 200
“ CircoTherm® eco 160 40 - 200
% Top/bottom heating 170 50 - 275
0 Pizza setting 220 50 - 275
ë Bread-baking 200 180 - 220
$ Bottom heating 200 50 - 225
4 Circo-roasting 170 50 - 250
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the display.
+ Full-surface grill
+ Full-surface grill (inten-
sive)*
220 50 - 275
Fixed setting
( Centre-area grill
( Centre-area grill (inten-
sive)*
180 50 - 275
Fixed setting
/ Slow cook Fixed setting
é Steam cooking Fixed setting
ê Dough proving Fixed setting
x Pyrolytic cleaning Fixed setting 1, 2 and 3
\ Interior lighting Fixed setting
Operating mode Default temper-
ature in °C
Temperature
range in °C
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the display.