Sharp EL-9900 - Manual (Page 34)

24
Chapter 2: Operating the Graphing Calculator
5. Type 3 4 . 5 6 7 ,
0 ), and press E.
SETUP Menu
Use this menu to verify basic configurations, such as to define the calculator’s editing
preferences, and scientific and mathematical base units.
To check the current configuration of the calculator, press @,
then ;.
By entering menu items (B
DRG through H SIMPLE),
various setups can be changed.
To exit the SETUP menu, press
C.
Example
Display the calculation result of “1000 2 ” in scientific notation.
1. Press @, then ;.
Within the SETUP menu,
press C, then 3 to
select 3 Sci under the C
FSE menu.
Tips: Using the arrow keys, move the cursor down to the C FSE
position, press E, and then move the cursor down to the 3
Sci position. Press E to select the sub-menu item.
2. The display goes back to the
SETUP menu’s initial screen.
3. Press C to exit the
SETUP menu.
Checking the
calculator’s
configuration