Sharp ER-A280F - Manual (Page 153)

1.
In the mode selection window, select “7 AUTO KEY MODE”.
• The AUTO KEY window will appear.
2.
Select the pertinent AUTO key from the key list.
3.
Enter the key data and press the
e
key.
Your register allows to program up to 25 key operations.
Function key: Key code (3 digits: XXX)
Department key: Department code (4 digits: 00XX)
PLU key:
PLU code (5 digits: XXXXX)
4.
To terminate the procedure enter the A or
C
key, the
confirmation window will appear for data saving.
Select “SAVE” or “ABANDON” and enter the
e
key.
Automatic Sequencing Key Programming
If you program frequently performed key operations for the AUTO keys, you can enter those key operations
simply by pressing the corresponding AUTO keys in key operations.
Procedure
▼
▼
▼
Select “7 AUTO KEY MODE” from
the mode selection window.
151
ER-A280F_N(SEEG)(E)-8 09.6.18 6:55 AM Page 151