Sharp ER-A280F - Manual (Page 110)

108
■ Link PLU table (for PLU/EAN link)
It is possible to link PLUs (linked PLUs) with a PLU or EAN (link PLU/EAN) so that with a single key
depression of the link PLU or EAN key. However, the number of linked PLUs is a maximum of 30.
Program each item as follows:
• LINK PLU TABLE (Use the numeric entry)
Link PLU table number (1 through 15)
• LINK PLU #XX
Enter linked PLU codes (max. 30 PLUs).
• PLU codes should be defined before programming a link PLU
table.
• If the
D
key is pressed on the table number selection menu, the
selected table will be deleted.
NOTE
Selected
link PLU
E
table no.
Procedure
▼
▼
The screen continues.
ER-A280F_N(SEEG)(E)-6 09.6.18 6:53 AM Page 108