Sharp ER-A280F - Manual (Page 147)

145
The following illustration shows those options included in this programming group.
1 BUILT-IN PRINTER
➡
See “Built-in printer” on page 145.
2 BCR(SCANNER)
➡
See “Scanner” on page 146.
3 ONLINE
➡
See “On-line” on page 146.
4 CONTROL UNIT
➡
See “Control unit” on page 146.
13 DEVICE CONFIG
Device Configuration Programming
Use the following procedure to select a device configuration programming:
1.
In the SETTING window, select “13 DEVICE CONFIG”.
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:
1 BUILT-IN PRINTER Built-in printer
2 BCR(SCANNER) Scanner
3 ONLINE On-line
4 CONTROL UNIT Control unit
Procedure
▼
Program each item as follows:
• LIGHT&SHADE (Use the numeric entry)
Select a light and shade level. (00 to 99)
00: 89% for standard
50: 100%
99: 110% for standard
• IMAGE FOOTER (Use the selective entry)
PRINT: Prints footer graphic logo.
NOT PRINT: Not print footer graphic logo.
• DIFF ST FEED
Difference subtotal feed line (0 to 9)
■ Built-in printer
Procedure
ER-A280F_N(SEEG)(E)-7 09.6.18 6:55 AM Page 145