Sharp ER-A280F - Manual (Page 105)

103
■ Department
The register ER-A280F is equipped with 6 standard departments and the register ER-A280N is equipped
with 12 standard departments. They can be equipped with a maximum of 99 departments.
Use the following procedure to program for departments.
Program each item as follows:
For more information about the entry patterns, see the “Basic
Instructions” section.
• PRICE (Use the numeric entry)
Unit price (max. 8 digits)
• GROUP No. (Use the numeric entry)
01-09: Plus department
10: Minus department
11: Plus hash department
12: Minus hash department
13: Plus bottle return department
14: Minus bottle return department
NOTE
• TEXT (Use the character entry)
Description for a department. Up to 16 characters can be entered. (Default text: DPT.nn)
• ENTRY TYPE (Use the selective entry)
Type of unit price entry for departments
OPEN & PRES.: Open & preset
PRESET:
Preset only
OPEN: Open only
INHIBIT: Inhibited
• COMMISSION# (Use the numeric entry)
Commission group number (1 through 9)
If the number “0” is entered, no commission group number will be assigned to a department.
You can assign each department to a commission group.
• SIF/SICS (Use the selective entry)
Department type selection
SIF: SIF
department
SICS: SICS department
NORMAL: Department other than SIF or SICS department
• PRNT ON CLK (Use the selective entry)
YES: Prints the department sales information on the clerk report.
NO: Prints nothing on the clerk report.
• HALO (Use the numeric entry)
• You can set an upper limit amount (HALO) for each department. The limit is effective for the REG-
mode operations and can be overridden in the MGR mode.
• AB is the same as A x 10 B
A: Significant digit for HALO (1 through 9)
B: Number of zeros to follow the significant digit for HALO (0 through 8)
Procedure
▼
Select a pertinent dept. code from
the departments list.
The screen continues.
ER-A280F_N(SEEG)(E)-6 09.6.18 6:53 AM Page 103