Bosch Bottom Freezer I - Manual (Page 23)

23
i Note
- Attach the adjusting rail to the furniture door with at
least 6 screws. One screw should be inserted under
each double threaded bolt.
- The adjusting rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best loadĆbearing material
of the furniture door.
19. Attaching and aligning
the furniture door
(refrigerator compartment)
i The double threaded bolts are responsible for
adjusting the height of the furniture front.
q Hang the furniture door on the double threaded
bolt.
q Align the furniture door with the double threaded
bolts (Torx screwdriver).
q Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.
q Remove the furniture door.
q Using the positioning aid, set both longitudinal sides
of the furniture door parallel.
q Using a square, extend the drill hole marks which
you have just made to the vertical marks.
q Mark and drill the holes.