Bosch Bottom Freezer I - Manual (Page 16)

16
9. Pushing the appliance into the installation cavity
d CAUTION d
Caution when pushing the appliance into the
installation cavity. Do not damage the water pipe
or power cord attached to the floor.
i When the floor or the appliance is tilted in
comparison to the installation cavity adjust height
adjustable wheels before you move the appliance
into the installation cavity.
q Put the mains plug into the socket.
i In the case of SideĆbyĆSide appliances a separate
socket must be used for each appliance.
q Prevent the power cord from becoming caught.
Tie a piece of string to the middle of the power cord
and feed forwards under the appliance. When
pushing in the appliance, pull the cable forwards.
or
Using adhesive tape, stick the power cord to the
floor centrally behind the appliance approx. 15"
(380 mm) away from the rear panel of the cavity.
q Carefully push the appliance into the cavity until
the heightĆadjustable wheel interlock with the
antiĆtip brackets.
q Remove edge protection.