beautypg.com

Caution, Connecting the water to the appliance, Attaching the toe kick panel – Bosch Bottom Freezer I User Manual

Page 19

background image

19

13. Connecting the water to the

appliance

i

When connecting the water pipe to the solenoid
valve of the appliance, follow the instructions
supplied by the manufacturer of the ice maker
installation kit enclosed with the installation manual.

d

CAUTION

d

When bending the water pipe, do not kink it,
otherwise there is a risk of leaks and water damage.
Use bending aids.

q Remove the cap from the appliance connection 1.

q Bend the water pipe according to the location of the

connection on the appliance 2.

q Push the union nut and seal onto the water pipe.

q Push the end of the water pipe into the appliance

connection and screw on the union nut 3.
Tighten handĆtight.

q Using the openĆended wrench, tighten the union

nut. Do not overturn!

q Open the shutĆoff valve and main water tap.

Check the connection on the shutĆoff valve and
on the appliance for leaks.

14. Attaching the toe kick panel

d

CAUTION

d

The maximum height of the toe kick panel is 4" from
the top of the floor. Do not cover ventilation slots in
the base panel. Risk of damage to the appliance.

q If required, cut the toe kick panel to the required

length.

q Attach the base panel to the appliance.

q Remove the protective film from the adhesive pads

on the Velcro.

q Fit the toe kick panel to the base panel and press

firmly into place.