Bosch Bottom Freezer I - Manual (Page 22)

22
17. Loading the appliance door
When attaching the furniture doors, it is recommended
to load the door storage compartments in the appliance
with weights in order to ensure that the gap width is as
precise as possible.
Recommendations:
Refrigerator compartment 26 lbs / 12 kg (per door)
Freezer compartment 22 lbs / 10 kg
18. Attaching the adjusting rail
to the furniture door
(refrigerator compartment)
i The adjusting rail is the most important means of
adjusting the furniture front.
q Unscrew the installation support part from the
appliance doors.
i Store the positioning aids, there will be used in
an installation step later.
q Remove the cover plate from the freezer
compartment door.
i Check the double threaded bolts on the adjusting
rail. Both of them must project out of the door by
3 /
16
" (5 mm).
q Measure the distance X between the adjusting rail
and the overhead furniture/fixtures.
q Mark this amount X on the rear of the furniture door.
q Determine and mark the centre of the furniture door.
q Loosen the 2 nuts and remove the adjusting rail.
q Put on the adjusting rail and align along the marks.
Mark the drill holes.
q Drill the holes.
q Screw on the adjusting rail tightly.