Barco RLM R6+ PERFORMER R9010270 - Manual (Page 81)

8. Image Menu
Image 8-25
x
200
0 1000
Image 8-26
Change between x and y with
Image 8-27
the x and y coordinate changes between 0.00 and 1.00. For practical reasons, the values on the slider box are
multiplied by 1000.
8.7 Color space
Color space
A color space is a mathematical representation for a color. For example, the RGB color space is based on a Cartesian
coordinate system.
What can be adjusted ?
The color space (gamut), the collection of colors which can be reproduced by the projector, can be adjusted to 4 predefined stored
values (one projector specific, 2 international standards and one custom preset). A temporary custom adjustment is possible. The
maximum color space which can be displayed is the projector color space. This color space is measured at the factory and stored
inside the projector.
Difference between Custom Preset and Custom?
The Custom Preset color space can be created in the same way as a custom color space but the values are stored for later recall.
When a Custom color space is create and when another color space is selected the current custom values are overwritten and
cannot be recalled.
How to switch the color space ?
1. Press MENU to activate the menu bar.
2. Press → to select the Image item. (image 8-28)
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select Color space.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select the desired color space.
R5976816 RLM R6+ PERFORMER 02/06/2006 77