Barco RLM R6+ PERFORMER R9010270 - Manual (Page 143)

14. Installation menu
Security
Activating the security mode involves
the following things:
- The startup screen (identification window)
will contain a line withthe name of the
owner in it.
- You will be asked to enter a PIN code
every time the projector lost its power.
Are you sure you want to activate the
"Security mode"
YES NO
Image 14-18
Security
Enter name of owner
e.g. Barco Educational Center
Image processing department
Brussels - Belgium
ACCEPT CANCEL
Image 14-19
Security
Enter your PIN:
Confirm your PIN code:
Image 14-20
Message
The security mode has been
activated.
Don't forget your PIN code!
Image 14-21
How to disable the security mode ?
1. Press MENU to activate the menu bar.
2. Press → to select the installation item. (image 14-22)
3. Press ↓ to pull down the menu.
4. Use ↑ or ↓ to select Security.
5. Press → to open the menu.
6. Use ↑ or ↓ to select OFF
7. Press ENTER to confirm
An Enter PIN code dialog box will be displayed.
8. Enter your PIN code.
When the PIN code is correct the security mode will be switched off.
Image 14-22
R5976816 RLM R6+ PERFORMER 02/06/2006 139