Barco RLM R6+ PERFORMER R9010270 - Manual (Page 59)

6. Source selection
Image 6-5
How to select an input on the Video Selector
1. Use ← or → to browse through the different inputs.
2. Press ENTER to select.
Use MENU or BACK to exit the Video Selector.
Graphical interface
B
C
D
E
A A
B
C
D
E
Image 6-6
A BNC or S-Video connector on the video selector can be in one of following conditions:
•
A: connector disabled
• B: connector enabled but inactive (no video signal present on connector)
• C: connector enabled & active (video signal present on connector)
• D: connector enabled active & selected
• E: connector enabled & active & focused (browser positioned on connector)
A source can also be selected via the dedicated key 9 on the RCU. Key 9 allows to browse through the active
inputs.
R5976816 RLM R6+ PERFORMER 02/06/2006 55