beautypg.com

4 cleaning the lens, 4 battery insertion in the remote control, Cleaning the lens – Barco RLM R6+ PERFORMER R9010270 User Manual

Page 20: Battery insertion in the remote control

background image

2. Installation Guidelines

Image 2-3

2.3.4

Cleaning the lens

To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for clean. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.

Necessary tools

Toraysee

TM

cloth (delivered together with the lens kit). Order number : R379058.

How to clean the lens ?

Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee

TM

cloth.

2. Always wipe lenses in a single direction.

Warning:

Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.

3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.

4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.

C

AUTION

:

Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the

cloth.

Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.

Other lenses can also be cleaned safely with this Toraysee

TM

cloth.

2.4

Battery Insertion in the Remote Control

Where to find the batteries

The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.

How to install the batteries

1. Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (image 2-4)

2. Slide the cover forwards to remove. (image 2-5)

3. Push the battery body towards the spring and lift it up to remove. (image 2-6)

4. Insert two AA size batteries, making sure the polarities match the + and – marks inside the battery compartment (image 2-6).

5. Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place

(image 2-5).

16

R5976816 RLM R6+ PERFORMER 02/06/2006