Nokia 9290 - Manual (Page 68)

50
Phone
SYSTEM NAME or LOGO - The wireless system you are currently using.
and bar - The current signal strength at your location. The more bars visible,
the stronger the signal.
and bar - Battery charge level. The more bars visible, the more charge there is
in the battery.
- The phone keypad is locked or the lock code is active.
- The phone will not ring to notify you of an incoming call.
- You have received one or several new voice messages.
- You have received one or several new short messages.
- You have received one or several new faxes.
- Infrared transmission is active.
- Call forwarding is active.
Make a call
To make and receive calls,
• the phone must be switched on,
• the communicator must have a valid SIM card fitted, and
• you must be located in a service area of the wireless system.
Tip: When a call is active,
you can use the and
keys to lower or raise
the volume level of the
earpiece.
1 Key in the area code and the phone number of the person you wish to call.
If you make a mistake, you can remove the digits one at a time by pressing
Clear repeatedly. To clear the whole display, press and hold Clear.
2 Press to dial the phone number.
3 To end the call, press .