beautypg.com

Capture an image – Nokia C6-00 User Manual

Page 67

background image

or Show or hide the viewfinder grid

(images only).

Activate the self-timer (images only).

Activate sequence mode (images

only).

Open .

Photos

Image settings:

Select a color effect.

Adjust the white balance. Select the

current lighting conditions. This allows

the camera to reproduce colors more

accurately.

Adjust the exposure compensation

(images only). If you are shooting a dark

subject against a very light background,

such as snow, adjust the exposure to +1 or

+2 to compensate for the background

brightness. For light subjects against a

dark background, use -1 or -2.

Adjust light sensitivity (images only).

Increase the light sensitivity in low light

conditions to avoid too dark images and

blurry images. Increasing the light

sensitivity may also increase the image

noise.

Adjust contrast (images only). Adjust

the difference between the lightest and

darkest parts of the image.

Adjust sharpness (images only).

The screen display changes to match the

settings you define.
The capture settings are shooting-mode

specific. Switching between the modes

does not reset the defined settings.
If you select a new scene, the capture

settings are replaced by the selected

scene. You can change the capture

settings after selecting a scene if needed.
Saving the captured image may take

longer if you change the zoom, lighting or

color settings.

Capture an image

When capturing an image, note the

following:

Use both hands to keep the camera

steady.

The quality of a digitally zoomed

image is lower than that of a non-

zoomed image.

The camera goes into battery saving

mode after about a minute of

inactivity.

Keep a safe distance when using the

flash. Do not use the flash on people

or animals at close range. Do not cover

the flash while taking a picture.

1 To switch from video mode to image

mode, if necessary, select > .

2 Press the capture key. Do not move

the device before the image is saved

and the final image displayed.

Capture images with the secondary

camera

1 Select

Options

>

Use secondary

camera

.

2 To capture an image, select

. Do

not move the device before the image

is saved and the final image

displayed.

Zoom in or out when capturing an

image

Use the zoom slider.

© 2010 Nokia. All rights reserved.

67