Toshiba Portege M750 - Manual (Page 23)

User’s Manual 1-7
PORTÉGÉ M750
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
Monitoring of power condition
section in Chapter 6, Power and Power-Up Modes , for more information.
1. Open the display panel.
2. Slide the Power Button Lock Switch to the right.
3. Press and hold the computer’s power button for two or three seconds.
Figure 1-5 Turning on the power
Starting up for the first time
The Microsoft Windows Vista ® Startup Screen will be the first screen
displayed when you turn on the power. Follow the on-screen instructions on
each screen in order to properly install the operating system.
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
Starting
up for the first time for more information.
■ Volume cannot be adjusted during Windows Setup.
Power button
Power Button Lock Switch
When it is displayed, be sure to read the Software License Terms
carefully.