Toshiba Portege M750 User Manual
Page 134
4-36
User’s Manual
PORTÉGÉ M750
How to remove CD/DVD when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole near the eject button.
Figure 4-27 Manual release with the eject hole
Writing CD/DVDs on DVD Super Multi (Double Layer)
Drive Kit II
You can use the DVD Super Multi (Double Layer) Drive Kit II to write data to
either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer), DVD+RW or DVD-RAM discs. TOSHIBA Disc
Creator is provided as writing software with this computer.
Eject hole
Diameter 1.0mm
Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.
■
Please refer to the
in Chapter 2 for details about the
types of writable CD and DVD discs that can be supported by this
computer.
■
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
■
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
■
When the power of the optical disc drive is off, the disc tray will not
open even if the eject button is pushed. Use the ODD to turn the power
of the optical disc drive on. Please refer to Chapter 5,
.