Using the web camera, Battery settings – Toshiba Qosmio X500 User Manual
Page 85
User’s Manual
4-11
Operating Basics
There are several USB Sleep and Charge function modes. "Mode4/Typical
Mode" should normally be used. Set one of the other modes (try from
"Mode3/Alternate Mode")
*1
if the charge function cannot be used in "Mode
4 (Default)". This function may not be able to be used with some connected
external devices even if the appropriate mode is selected. In this situation,
uncheck the "USB Sleep and Charge" checkbox and stop using this
function.
*1 Some mode may not be displayed in the list.
Battery Settings
This utility can be used to specify the lower limit of remaining battery life for
USB Sleep and Charge. Move the slider bar to specify the lower limit. If the
remaining battery life falls before the setting, the "USB Sleep and Charge"
function will be stopped. Unchecking the "Enable under Battery Mode"
checkbox sets the utility to only charge when the AC adaptor is connected.
Using the Web Camera
This section describes the bundled webcam utility, which can capture still
and video images. The web camera will auto-run when Windows starts.
* Provided with some models
Please remove the protective plastic-film before using the Web Camera.
TOSHIB
A
Satel
lite
1
2
3
1. Built-in microphone *
2. Web Camera Lens *
3. Web Camera LED *