Toshiba Qosmio X500 - Manual (Page 49)

User’s Manual 2-10
The Grand Tour
Optical Disc Drive
An ATAPI interface controller is used for optical disc operation. When the
computer is accessing an optical disc, an indicator on the system glows.
Region codes for BD drive and media
Optical disc drives and their associated media are manufactured according
to the specifications of three marketing regions. Region codes can be set
from WinDVD BD([Region] tab in [Setup] dialogue). When you purchase
BD Video, make sure it matches your drive, otherwise it will not play
properly.
Writable discs
This section describes the types of writable CD/DVD/BDs. Check the
specifications of your drive for the type of discs it can write. Refer to
Chapter 4, Operating Basics .
CDs
■ CD-R discs can be written only once. The recorded data cannot be
erased or changed.
Previous Button Skips backwards to the previous track, chapter
or digital file. Refer to Chapter 4, Operating
Basics , for details. (Provided with some models)
Volume Down Button Decreases the volume of the speakers.
Mute Button
Press this button to mute/un-mute sound.
Play/Pause Button Press this button to begin playing an audio CD, a
DVD movie or digital audio file. This button also
acts as a Pause button. (Provided with some
models)
Next Button Skips forward to the next track, chapter or digital
file. Refer to Chapter 4, Operating Basics , for
details. (Provided with some models)
Volume Up Button Increases the volume of the speakers.
Code Region
A Canada, United States, Japan, Southeast Asia,
East Asia
B Europe, Australia, New Zealand, Middle East,
Africa
C China, India, Russia