Toshiba Qosmio G20 (PQG21) - Manual (Page 150)

9-6 User’s Manual
Optional Devices
Inserting a SD card
To insert a SD card, follow the steps below.
1. Insert a SD card in the Bridge media slot.
2. Press gently to ensure a firm connection.
Inserting a SD card
Removing a SD card
To remove a SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
Removing a SD card
Bridge media slot
SD card
■ Make sure the SD card is oriented properly before you insert it.
■ Do not turn the computer off or switch to Standby Mode or Hibernate
Mode while files are being copied - doing so may cause data to be lost.
SD card
Bridge media slot
■ Make sure the SD card indicator is out before you remove the SD card
or turn off the computer’s power. If you remove the SD card or turn off
the power while the computer is accessing the SD card you may lose
data or damage the card.
■ Do not remove a SD card while the computer is in Standby or
Hibernation mode. The computer could become unstable or data in the
SD card could be lost.