Toshiba Magnia 7100 - Manual (Page 9)

3
Server Setup TooL
Input Locale
8. After the Start-up screen of the 'Server Setup TooL', the Input Locale screen is
displayed.
Input Locale screen
Select one of the following keyboard layouts.
) Belgian French
) German
) Spanish
) Swiss French
) Swiss German
) United Kingdom
) U.S.
NOTE: The Input Locale screen only appears when you start the SST from the Startup Disk for the
first time. Locale information you select will be recorded on the Startup Disk. Once recorded, the
Input Locale screen will not be displayed again when you start the SST from the Startup Disk.
NOTE: To reconfigure the locale setting, you must record the locale setting on the Startup Disk using
the following procedure (1) or (2), then reinstall Windows 2000 Server / Windows NT Server 4.0
using the SST automatic installation procedure.
(1) Create a Startup Disk from [Utilities-Create Floppy Disks] and start the SST on the server from
the Startup Disk and select locale setting.
(2) Start the SST on another system and select locale setting. Select [Utilities-Setup Information]
and click [Save] on the' Confirm Parameter Settings' screen. The locale setting will be recorded
on the Startup Disk.Next start the SST on the server from the Startup Disk.