Toshiba Magnia 7100 - Manual (Page 56)

46
Utilities
Setup Support
Utility Menu
Setup Support
Setup Information
Clicking 'Setup Information' starts the Setup Information wizard and opens the 'Setup Wizard'
dialog box. In this box choices can be made on how the SST configures the server, hardware,
RAID, Utility Partition, and another system during the installation procedure. This menu reads
the current setting information from the SST Startup Disk and arranges the settings.
NOTE: To save the setup information created on the Startup Diskette, click [Save] on the Confirm
Settings page.
NOTE: The Input Locale screen appears only when you start SST from Startup Disk for the first time.
Locale information you select will be recorded on the Startup Disk. Once recorded, the Input Locale
screen never appears when you start SST from the Startup Disk.
NOTE: The Input Locale screen will alwaysbe displayed when the SST is started on another system.
Locale information you select will be recorded only when you select [Utilities-Setup Information] and
click [Save] on the Confirm Parameter Settings screen.
NOTE: To reconfigure the locale setting, you must record the locale setting on a Startup Diskusing
the following procedure (1) or (2), then reinstall Windows 2000 Server / Windows NT Server 4.0
using SST automatic installation procedure.
(1) Create Startup Disk from [Utilities-Create Floppy Disks] and start SST on the server from the
Startup Disk and select locale setting.
(2) Start SST on another system, select locale setting and select [Utilities-Setup Information] and
click [Save] on the Confirm Parameter Settings screen. The locale setting will be recorded on
the Startup Disk. Next start SST on the server from the Startup Disk.