Toshiba Magnia 7100 - Manual (Page 80)

68
HW Diagnostics
Log Utilities
Log Utilities
The 'Log Utilities' function logs error information generated while a test is in progress.
The results are stored in RAM..
The error logs can be checked by selecting [03. LOG UTILITIES] in the main menu.
Selecting [01.LOG UTILITIES] displays the following message:
Log Utilities Screen
XXXXX ERRORS
The message shows the number of errors.
PASS COUNT
If the test parameter "Test Loop" is set to "Yes" in the test, the pass count is displayed.
CNT
CNT shows the number assigned, according to the order in which the errors occurred..
TEST
XXX XX XX
digits 1-3 :Abbreviation of the test in which the error occurred.
MEMORY TEST RAM NPX TEST NPX
KEYBOARD TEST KBD CACHE MEMORY TEST CAH
DISPLAY TEST CRT SCSI TEST SCS
FLOPPY DISK TEST FDD CD-ROM TEST CDR
PRINTER TEST PRT SAF-TE TEST SAF
SCSI DISK TEST HDD SMC TEST SMC
digits 4-5: displays the subtest number in which the error occurred.
digits 6-7:
displays the step number in which the error occurred. (Depending on the
test, Digits 6-7 are not always displayed.)