Toshiba Magnia 7100 User Manual

Page 58

Utilities

Create Floppy Disks

Available Diskettes

The following diskettes can be created from the "Create Floppy Disks" menu.

Startup Disk
This diskette is necessary to start the SST.

DOS Disk
This diskette starts the utility programs used on the server.

HW Diagnostics Program
This diskette is used to boot from the floppy disk drive and run this program.
The HW Diagnostics Program checks the operation of the hardware and the input/output device
as well as displaying the configuration information of the system.

Adaptec 788x Windows NT Driver
This diskette is used on Windows NT for the MAGNIA7100 on-board SCSI controller.

Adaptec 7899 Windows NT Driver
This diskette is also used on Windows NT for the MAGNIA7100 on-board SCSI controller.

Intel LAN Windows NT Driver
This diskette is used on the Windows NT for the LAN controller installed on the network
server.

Sensor Data and LCD Setup Tool
This diskette is used to install this program on the client computers.
The 'Sensor Data and LCD Setup Tool' can update the sensor information on the SMC and
system boards.

Create Floppy disks

1. Select the title of the diskette you want to create, and click [OK] to continue.

Insert a blank diskette when instructed.