Toshiba Magnia 7100 - Manual (Page 54)

44 Utilities
Starting the Utilities from the Utility Partition
Starting the Utilities from the Utility Partition
The Utility Partition is a partition where the maintenance tools are stored and created.
1. Switch on the server.
2. As the system boots, the following message (SMC BIOS) is displayed, press +
within four seconds after the message appears to boot to the Utility Partition.
3. When the Utility Partition is activated, the following message is displayed:
Utility Partition is successfully activated.
4. When selecting the Utilities" option in the [Main Menu] screen, the utility menu is
displayed.
Selectable items when the Utilities is started from Utility Partition
Selectable items
— Setup Information
— Create Floppy Disks
— HW System Configuration
— RAID Configuration
— HW Diagnostics
— Update Program
Utility Menu screen (started from Utility
Partition)
SMC BIOS xxx.xx.xxx
©xxxx,TOSHIBA CORPORATION. All Rights Reserved.
Key is accepted. (*)
Press + keys within four seconds
after the appearance of the message.
NOTE: If the disk access fails, the following message appears:
Error detected. Utility Partition is not activated.
If the Utility Partition does not exist, the following message appears:
Utility Partition is not found.