beautypg.com

Battery charger, Hdd kit (serial-ata), Battery charger -17 hdd kit (serial-ata) -17 – Toshiba PORTEGE M400 User Manual

Page 178: Removing the hard disk drive pack

background image

User’s Manual

8-17

Optional Devices

Battery Charger

The battery charger provides a convenient way to charge battery packs

without requiring the use of your computer. The battery charger holds up to

two battery packs (lithium ion).

HDD Kit (Serial-ATA)

An extra hard disk drive expands the flexibility of your system and lets you

carry your data without carrying the computer.

Removing the hard disk drive pack

To remove the hard disk drive pack, follow the steps below.
1. Set the computer to boot mode and turn off the power.
2. Disconnect the AC adaptor and all external cables connected to the

computer.

3. Turn the computer upside down and remove the battery pack. Refer to

Replacing the battery pack

section in Chapter 6, Power and Power-Up

Modes, for details.

4. Loosen two screws securing the hard disk drive cover.
5. A small row of ridges marks the latches securing the cover. Press on

these ridges until you hear a click.

6. Press on the arrows and lift the cover up and out to remove it.

Removing the hard disk drive cover

7. Reposition the hard disk drive until it is vertical.

Use a size 1 Phillips screwdriver.

Screws

Hard disk

drive cover

This manual is related to the following products: