Moving the computer, Moving the computer -50 – Toshiba PORTEGE M400 User Manual
Page 118
User’s Manual
4-50
Operating Basics
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■
Before moving the computer, it is recommended that you change the
function of the HDD Protection. Refer to the section,
, in this chapter.
■
Make sure all disk activity has ended before moving the computer.
Check the HDD indicator on the computer.
■
If a CD/DVD is in the drives, remove it. Also make sure the disc tray is
securely closed.
■
Turn off the power to the computer.
■
Disconnect the AC adaptor and all peripherals before moving the
computer.
■
Close the LCD display panel. Do not pick up the computer by its display
panel.
■
Before carrying your computer, shut down the computer, disconnect the
power cable and wait until the PC cools down. Failure to follow this
instruction could result in minor injury.
■
Always turn off the power when you move the computer. If the power
button has a lock, set it to the lock position. Also be careful not to
subject the computer to impact. Failure to follow this instruction could
result in damage to computer, computer failure or loss of data.
■
Never transport your computer with PC cards installed. This could
cause damage to your computer and/or PC card, resulting in product
failure.
■
Use a carrying case when transporting the computer.
■
When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
■
Do not carry your computer by holding any protruding areas.