Toshiba Magnia 3200 User Manual
Page 79
Item Explanation
System
Monitors the system information
-% Processor Time-
Monitors the use ratio of the CPU.
-Processor Queue
Length-
Monitors the Processor's waiting queue.
-Total Interrupts/sec-- Monitors the interrupt frequency of the hardware.
Memory
Monitors the memory information.
-Available Bytes-
Monitors the rate of use of the physical memory.
-Page Faults/sec-
Monitors the number/seconds of the page faults.
-Pages/sec-
Monitors the total of the number by which the disk was written or
read when the page faults occurred.
-Pool Nonpaged
Peak-
Monitors the maximum number of bytes of a nonpaged pool that
the server used at a certain moment.
-% Committed Bytes
In Use-
Monitors the committed size of virtual memory
-Pool Nonpaged
Bytes-
Monitors the number of Pool Nonpaged Bytes; the system memory
area for the objects that exist in the physical memory without writing
them to the disk.
-Pool Paged Bytes-
Monitors the number of Pool Paged Bytes; the system memory area
for the objects which are enabled to be written when it is not in use.
Disk
Monitors the disk information
-Disk-
Monitors the used volume of the disk for each fixed drive.
Network
Monitors the network information.
-Server Sessions-
Monitors the number of server sessions.
-Errors Logon-
Monitors the number of server logon errors.
-Work Item
Shortages-
Monitors the frequency that STATUS_DATA_NOT_ACCEPTED is
returned during the receiving display time.
-Bytes Total/sec-
Monitors the number of bytes that are sent between the server and
network.
-Current Commands- Monitors the demand numbers that are in the queue to wait
operation.
-Reads Denied/sec-
Monitors the speed that the server denies receiving demand for
Raw reading.
-Writes Denied/sec-
Monitors the speed that the server denies receiving demand for
Raw writing.
-Packets
Received/sec-
Monitors the numbers/seconds of the packets received per network
adapter.
-Packets Sent/sec-
Monitors the numbers/seconds of the packets sent per network
adapter.
Memo
In case of the following condition, the Performance function writes in an event
log.
[Watch this item] check box in the performance set up screen is
checked.
[Write Event Log] check box is checked.
Each value continues exceeding Alert Level specified in this screen.
69