Toshiba Magnia 3200 - Manual (Page 54)

SCSI RAID Status screen (In the case of the RAID controller TAH/T100/T150)
Item Explanation
-Adapter-
Displays adapter information.
-Adapter Number- Displays the adapter number.
-Logical Drive Count- Displays the number of logical drives.
-PCI Bus Number- Displays the number of the PCI Bus.
-PCI Slot Number- Displays the number of the PCI slot.
-Driver Version- Displays the driver version.
-Firmware Version- Displays the firmware version.
-BIOS Version- Displays the BIOS version.
-Controller Revision- Displays the controller revision.
-Processor Revision- Displays the processor revision.
-SPC Revision- Displays the SPC revision.
-Cache Size- Displays the size of the cache.
-Rebuild Priority In
Idle-
Displays the rebuild priority in the idle condition.
-Rebuild Priority In
Busy-
Displays the rebuild priority in the busy condition.
-HDD Patrol Priority- Displays the priority of the HDD patrol.
-Buzzer Mode- Displays the mode of the buzzer for the notice of an alert.
-Channel Count- Displays the number of the channels.
-Battery Status- Displays the status of the battery.
-Logical- Displays information on the logical drive.
-Adapter Number- Displays the adapter number.
-Logical Drive
Number- Displays the logical drive number.
-Physical Drive Count- Displays the number of the physical drives.
-Hotspare
Management-
Displays the content of setting about the hotspare.
-RAID Level- Displays the level of RAID.
-Stripe Size- Displays the stripe size.
-Sub-array Count- Displays the number of the array which constitutes the logical drive.
-RDC Policy- Displays the content of setting about the cache for reading.
-WBC Policy- Displays the content of setting about the cache for writing.
-Capacity- Displays the capacity of the logical drive using the unit of MB.
-Logical Drive Status- Displays the status of the logical drive.
-Group Status- Displays the status of the RAID group.
-Auto Rebuild Mode- Displays the mode of the auto rebuilding.
-Rebuild Status- Displays the status of the necessity or the execution about the
rebuilding.
-Maintenance Status- Displays the status of the execution about the maintenance
operation (An adjustment check, a parity generation or a deflag).
-Rebuild Progress- Displays the progress of the rebuilding or the maintenance
operation using the unit of %.
-Booster Block Size- Displays the block size of the RAID BOOSTER.
44