Toshiba Magnia 3200 User Manual
Page 111
Configure Port Usage window
In the [Configure Port Usage] window, select the [Receive calls only] check box in [Port
Usage], and then click [OK]
In the [Remote Access Setup] window, click [Network].
Network Configuration window
Select the [TCP/IP] check box, and then click [Configure].
RAS Server TCP/IP Configuration window
Because DHCP and DNS are not used in this example, make settings as follows:
elect the [Use static address pool] check box, and specify the start and end addresses.
uest a predetermined IP address] check box.
Click [OK].
the [Network Configuration] window, click [OK].
Select one of items in the [Allow remote TCP/IP clients to access].
S
Select the [Allow remote clients to req
In
101
This manual is related to the following products: