Toshiba Magnia 3200 - Manual (Page 52)

3.3.5 SCSI RAID Status screen
When you click SCSI RAID Status, the screen shown below is displayed.
According to the type of RAID controller installed, the items displayed in the screen may
differ.
SCSI RAID Status screen (In the case of the RAID controller kit-E2H/F/G)
Item Explanation
-Adapter-
Displays adapter information.
-Index- Displays the adapter number.
-Logical Drive Count- Displays the number of logical drives.
-Firmware Version- Displays the firmware version.
-BIOS Version- Displays the adapter BIOS version.
-Dram Size in MB- Displays the amount of DRAM installed on the adapter.
-Rebuild Rate in
Percent-
Displays the rebuild rate.
-Flush Interval- Displays the Internal Cache Flush Interval of the logical drive in
WriteBack mode.
-Max Concurrent
Cmds-
Displays the maximum number of concurrent commands supported.
-Spinup Delay- Displays the spin-up delay.
-Spinup Count- Displays the spin-up count.
-Scan Channels- Displays the number of scan channels.
42