Toshiba Magnia 510D User Manual
Page 72
64
HW Diagnostics
Log Utilities
PASS
It shows the pass count where the error occurred.
STS
It shows the error status.
The meaning of the error status depends on the test item.
ADDR
It shows the address where the error occurred.
WD
It shows the write-data at the occurrence of the error.
RD
It shows the read-data at the occurrence of the error.
ERROR NAME / DETAILS
It shows the error name and its detail information.
Key operation for Log Utilities
To scroll the error log screen, or to save and to clear the error log information, use the
following keys:
<
↓
> key
: scrolls to the next page.
<
↑
> key
: scrolls to the previous page.
<1> key
: clears the error log information.
<2> key
: prints out the error log information.
<3> key
:
reads the error log information saved on the floppy disk.
<4> key
: saves the error log information on the floppy disk.
NOTE: When the error log information is cleared with the key operation above, the error information
recorded on the diskette is also cleared.
NOTE: For [06. SCSI HDD TEST], the first digit of STS means SCSI ID.
For [11. IDE HDD TEST], the first digit of STS means Drive Number.