Toshiba Magnia 510D User Manual

Page 24

Setup

Update Driver Settings (Windows 2000 Quick Installation)

Update Driver Settings

After the network settings screen, the Update Driver Settings screen appears.

Update Driver Settings screen

SCSI Driver
Driver for SCSI controller (if the ASC-29160N SCSI controller is not installed on your
computer, this item will be gray-ed out.)

RAID Controller Driver
Driver for RAID controller (if the MR475 RAID controller is not installed on your computer,
this item will be gray-ed out.)

LAN Driver
Driver for Network adapter

NOTE: The drivers for the server hardware are on the Server Setup TooL CD-ROM. You may,
however, have installed equipment that was shipped with newer drivers on diskettes. If you need to
use the drivers on diskettes, continue with this section. If you wish to use the drivers from the CD-
ROM, proceed to the next step by clicking [NEXT].

NOTE: If you select the "SCSI Driver” or the “RAID Controller Driver”, the list of devices will be
shown on the screen, after setting the driver diskette. You must select correctly one of the devices
from the list. Refer to the MAGNIA510D user’s guide and the MegaRAID User’s Manual for
information about the device name.