Toshiba Magnia 510D User Manual

Page 27

Setup
Setup Option (Windows 2000 Quick Installation)

Setup Option

After you have specified the installation options for Update Driver Settings, the Setup
Option screen appears. Use this screen to specify the setup installation features you want
enabled during the installation process.

Setup Option screen

Beep sound in case of disk change
Sounds an audible alert (beep) to change storage media (CD-ROM and diskette).

Start installation according to parameter settings at boot time
The next time the SST starts, the installation automatically begins after a confirmation
message, using the configuration information currently stored on the Startup Disk. If the
necessary devices have not been installed yet, their device drivers will not be installed. If
this option is not selected, the SST starts normally at the Main Menu.

Confirm partition information during installation procedure
A dialog box appears, requiring you to confirm the deletion of the existing partition.
If a disk partition already exists, a confirmation message appears, asking if you want to
delete the partition. If this option is not checked, setup deletes the partition without
prompting you for confirmation.

NOTE: If you have an existing partition (such as Windows 2000, Windows NT or NetWare), the
partition is deleted first before installation.