Toshiba Magnia 510D - Manual (Page 34)

28 Setup
Network Setting [1] (Windows NT 4.0 Quick Installation)
Network Setting [1]
After you have specified the server role, the Network Setting [1] screen appears. This is
the screen where you specify the network setup method.
Network Setting [1] screen
Select one of the following network settings, then click [Next].
Simplified Setting
Allows you to set up a protocol and domain or workgroup manually. The LAN driver is
automatically installed, and existing service settings are set up.
Detailed Setting
SST will stop the auto install at the point where the Windows NT Server 4.0 setup program
accepts the user input. After the user's input ends, the process continues.
NOTE: If you select the "Detailed Setting", proceed to [Chapter 2 - Update Driver Settings (Windows
NT 4.0 Quick Installation].