Toshiba Magnia 510D User Manual
Page 60
52
HW Diagnostics
Selecting Items of Running Test
Selecting Items of Running Test
A screen appears when you select [02. TEST ITEM EDIT]. This menu shows the current items
in the running test, and will allow you to add or delete individual tests.
TEST ITEM EDIT FOR RUNNING TEST
Adding Test Items
To add a test item to the Running test, press key, then select a test item with arrow keys,
and press
To return to the previous menu, press
Deleting Test Items
Move the cursor on a test item, then press to delete the test item.
Saving Test Items
When you exit the test items selection menu, the message "Do you save data?" appears. Select
"YES" to save setting, or "NO" not to save the setting.
NOTE: To check the error log, select [03.LOG UTILITIES] in the main menu. For the key operation
on the error log display, refer to "Checking error log" in this chapter. If the test in progress has been
stopped, the test result is not displayed.
NOTE: The edited test items are saved on the system memory. When you restart the HW
Diagnostics Program, the test items will return to the initial setting.
NOTE: Do not add the subtest [01. Pressed Key Display] of [02. KEYBOARD TEST] to the Running
test. This subtest requires a key input so that the Running test in progress is stopped if this subtest is
added to the Running test.
Do not select only the subtest [08. CACHE MEMORY TEST] as the Running test.
NOTE: The following items are for the SCSI model. For the IDE model, [06. SCSI HDD TEST
(02.Connection)] will automatically be replaced to [11. IDE HDD TEST (01.Sequential read)].