Toshiba Magnia 510D User Manual

Page 65

HW Diagnostics
PRINTER TEST

[05. PRINTER TEST]
To test the operation of the printer port.

[01. Print Ripple pattern]
This subtest prints characters for codes 20h through 7Eh, line-by-line, while shifting one
character to the left at the beginning of each new line.

Print Ripple Pattern Example

PRINTER TEST (PRT) Error log

Status

Error name

Meaning

TIME OUT

Time out of printer control

[06. SCSI HDD TEST]
This test checks the SCSI HDD functions through the ASPI driver software. (You cannot select
this test if the SCSI HDD(s) does not exist.)
Before running the test, you must designate the items for testing.

HOST ID NUMBER
This option sets the target host adapter number. When you choose "ALL", the subtest tests all
disks connected to the server, and the next options, SCSI ID NUMBER and CHANNEL
NUMBER, will be ignored.

SCSI ID NUMBER
This option sets the SCSI ID to test. You can specify just one ID to test except ID: 7.

CHANNEL NUMBER
If the server has multiple SCSI channels, this option sets the channel number to test.

[01. Sequential address read]
This subtest is a sequential reading of all the blocks on the HDD, starting at block 0.

[02. Connection]
This subtest reads the logical sector at the end of the HDD, and then recognizes if the drive
is connected or not.