Toshiba Magnia 510D User Manual
Page 68
60
HW Diagnostics
SCSI TEST
CACHE MEMORY TEST (CAH) Error log
Status
Error name
Meaning
01
MEMORY PARITY ERROR
Memory parity error
02
PROTECT MODE ERROR
The shift to the protected mode failed.
03
CACHING ERROR
An error occurred on the cache system.
FF
DATA COMPARE ERROR
Data comparing error
[09. SCSI TEST]
To test the SCSI devices.
Before running the test, you must set the parameters. If "HOST ID NUMBER" is set as "ALL",
"SCSI ID NUMBER" and "CHANNEL NUMBER" are ignored.
[01. INQUIRY]
This subtest issues the INQUIRY command to the SCSI bus and displays result
messages returned from the devices on the SCSI bus. After specifying the valid host
and channel number, the INQUIRY command is sent to the target SCSI bus. It then
displays the result code from ID0 through ID15.
HOST
The channel number in the target host adapter.
CHAN
Indicates the ASPI angle ID and host adapter.
ID00, 01, 02 …
The SCSI ID number in the target host adapter.
The types of SCSI devices to be displayed are as follows:
HDD
Hard disk device
CD
CD-ROM device
CMT
Magnetic tape device
SCN
Scanner
PRT
Printer
MO
Magnet-optic disk device
MC
Media changer
WON
Write Once device
COM
Communication device
???
Undefined device
---
Not connected
The following screen shows an example when the built-in hard disk drive is connected
to the MR466 RAID controller.
INQUIRY Screen