Toshiba Magnia 510D - Manual (Page 58)

50
HW Diagnostics
Diagnostics Test
Diagnostics Test (01. DIAGNOSTIC TEST)
1. From Diagnostics Test Menu (DIAGNOSTIC TEST MENU) screen, select the desired
subtest number from the subtest menu. (To return to the Main Menu, select "99" or "Esc".)
01 MEMORY TEST
02 KEYBOARD TEST
03 DISPLAY TEST
04 FLOPPY DISK TEST
05 PRINTER TEST
06 SCSI HDD TEST
07 NPX TEST
08 CACHE MEMORY TEST
09 SCSI TEST
10 CD-ROM TEST
11 IDE HDD TEST
99 EXIT to DIAGNOSTICS MENU
2. After selecting the desired subtest, the following message will appear.
(For more detail information for each item, refer to [Chapter 4 Items of HW Diagnostics –
Details of Test items and Error Log Information]):
Diagnostics TEST - TEST PARAMETER
[01.Go to Test]
Start the test. If you need to stop the test program, press + .
[02.Test Loop]
Selecting "YES" increments the pass counter each time the test cycle ends, and restarts
the test cycle.
Selecting "NO" returns the subtest menu to the main menu after the test is completed.
[03.Error Stop]
Selecting "YES" stops the test program when an error is detected.
Selecting "NO" keeps the test running even if an error is detected.
NOTE: For the SCSI model, [11. IDE HDD TEST] cannot be selected.
For the IDE model, [06. SCSI HDD TEST] cannot be selected.