Toshiba Magnia 510D - Manual (Page 50)

43
Utilities
Utility Menu
Utility Menu
Setup Support
Setup Information
Clicking [Setup Information] starts the Setup Information wizard and opens the Setup Wizard
dialog box where you can make the choices for how SST configures the server, RAID, and
operating system during the installation procedure. This menu reads the current setting
information from the SST Startup Disk and arranges the settings.
NOTE: To save the setup information you created on a Startup Diskette, click [Save] on the Confirm
Settings page.
NOTE: The Input Locale screen only appears once when you start SST from Startup Disk for the first
time. The locale information that you selected will be recorded on the Startup Disk. Once recorded,
the Input Locale screen never appears again when you start SST from the Startup Disk.
NOTE: The Input Locale screen always appears when you start SST on another system. Locale
information you selected will be recorded only when you choose [Utilities-Setup Information] and
click [Save] on the Confirm Parameter Settings screen.
NOTE: To reconfigure the locale setting, you must record the locale setting on the Startup Disk by
procedure (1) or (2) listed below. Then, you can reinstall Windows 2000 Server / Windows NT Server
4.0 using SST automatic installation procedure.
(1) Create Startup Disk from [Utilities-Create Floppy Disks] and start SST on the server from the
Startup Disk and select locale setting.
(2) Start SST on another system and select locale setting, and then select [Utilities-Setup
Information] and click [Save] on the Confirm Parameter Settings screen. The locale setting will
be recorded on the Startup Disk. Start SST on the server from the Startup Disk.