Adjusting the mix sound level, Setting the clock mode, Selecting the background display – Pioneer SPH-DA100 User Manual
Page 44: Customising preferences

Customising preferences
08
Chapter
44
Engb
❐ You cannot adjust the picture adjustment
for rear view camera when “
Camera
Polarity
” is set to “
Off
”.
➲ For details, refer to Setting the rear view
camera on page 42 .
❐ You can adjust “
Hue
” only when the colour
system is set to “
NTSC
”.
❐ With some rear view cameras, picture ad-
justment may not be possible.
6 Tap or to adjust the selected item.
Each time you tap or
,
the level of the se-
lected item increases or decreases.
■
If you want to switch the adjustment item,
tap or .
❐ “
Brightness
”, “
Contrast
”, “
Color
”, “
Hue
”
can be adjusted from “
+24
” to “
–24
”.
❐ “
Dimmer
” can be adjusted from “
+1
” to
“
+48
”.
❐ “
Temperature
” can be adjusted from “
+3
”
to “
–3
”.
❐ You cannot operate this function while driv-
ing.
❐ Different “
Brightness
”, “
Contrast
”,
“
Dimmer
” settings can be set for when the
illumination switch is on and when it is off.
❐ The same specifications are applied to all
sources (Home screen, Settings screen,
Radio, iPod music) other than the video
source.
❐ The “
Dimmer
” setting is set to a common
setting in all sources.
Adjusting the mix sound level
You can adjust the mixed sound volume in three
levels.
When the audio sources are mixed, the second
sound channel plays at this setting level.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Mixed Sound Level].
Tapping
[
Mixed Sound Level
] switches be-
tween the three levels:
Low
—
Mid (default)
—
High
❐ Sound level “
High
” is the largest and “
Low
”
is the smallest.
Setting the clock mode
You can change the time format.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Clock Mode].
Tapping [
Clock Mode
] changes the settings as
follows:
12H (default):
Changes the display to 12-hour format.
24H:
Changes the display to 24-hour format.
Selecting the background display
You can change the audio source screen back-
ground and Home screen background.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap
[Background].
The background screen appears.
3 Tap the desired background display.
•
•