Pioneer SPH-DA100 - Manual (Page 38)

Customising preferences 08
Chapter
38
Engb
Adjusting source levels
“ Source Level Adjuster ” lets you adjust the vol-
ume level of each source to prevent radical
changes in volume when switching between
the sources.
❐ Settings are based on the FM volume level,
which remains unchanged.
1 Play the source you want to adjust the
volume level for.
The adjustable sources are “ iPod ”, “ Apps ”
and “ MW/LW ” band.
2 Display the “Audio” screen.
➲ For details, refer to Customising the audio
settings on page 35.
3 Tap [Source Level Adjuster].
The “ Source Level Adjuster ” screen appears.
4 Tap or to adjust the source vol-
ume.
“ +4 ” to “ –4 ” is displayed as the source volume
is increased or decreased.
Customising the system
settings
1 Press the Home button to display the
Home screen.
2 Flick the scroll area on the Home screen.
➲ For details, refer to Home screen on page 10.
3 Tap [Settings] on the Home screen.
The menu top screen appears.
4 Tap .
The “ System ” screen appears.
5 Tap the item that you want to change the
settings for.
6 After changing the settings, tap to re-
turn the Home screen.
Setting the rear output
This product’s rear output (rear speaker leads
output) can be used for a full-range speaker
(
Full ) or subwoofer ( Subwoofer ) connection.
If you switch the rear output setting to
“
Subwoofer ”, you can connect a rear speaker
lead directly to a subwoofer without using an
auxiliary amp.
Initially, the product is set for a rear full-range
speaker connection (
Full ).
❐ “ Rear speaker ” can be set only when the
source is set to “ OFF ”.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on this page.