Pioneer SPH-DA100 - Manual (Page 26)

Registering and connecting a Bluetooth device 06
Chapter
26
Engb
5 Tap the Bluetooth device name you
want to connect.
When a connection is successfully established,
the checkbox next to the device name is select-
ed.
The available profile icons are displayed as
follows:
: Appears when the HFP (Hands-Free Profile)
is available.
: Appears when the SPP (Serial Port Profile)
is available.
❐ If a device is already connected with the
same profile, that device is disconnected
and the new device will be connected.
Setting the Bluetooth auto
connect function
If this function is set on, a connection be-
tween your Bluetooth device and this product
will take place automatically as soon as the
two devices are less than a few metres apart.
Initially, this function is set to “On”.
1 Tap [Phone] on the Home screen.
➲ For details, refer to Home screen on page 10.
The phone menu screen appears.
2 Tap on the phone menu.
•
•
The “ Bluetooth Connection Menu ” screen
appears.
3 Tap [Auto Connect] to turn automatic
connection off.
If you Bluetooth device is ready for a Bluetooth
wireless connection, a connection to this prod-
uct will automatically be established.
■ To turn automatic connection on, tap [ Auto
Connect ] again.
Disconnecting a Bluetooth
device
1 Tap [Phone] on the Home screen.
➲ For details, refer to Home screen on page 10.
The phone menu screen appears.
2 Tap on the phone menu.