Pioneer SPH-DA100 - Manual (Page 13)

04 Using the radio
Chapter
13
Engb
Using the radio
Starting procedure
1 Press the Home button to display the
Home screen.
2 Tap [Radio] on the Home screen.
➲ For details, refer to Home screen on page 10.
3 Use the touch panel keys on the screen
to control the radio.
Reading the screen
Preset channel keys
➲ For details, refer to Storing the strongest
broadcast frequencies on the next page.
Current broadcast information
The following information is displayed:
: Programme service (PS) name
PTY information
: Song title
: Artist name
TRFC indicator
Shows the status of traffic announcements.
➲ For details, refer to Interruption icon sta-
tus on page 16.
NEWS indicator
Shows the status of news programmes.
➲ For details, refer to Interruption icon sta-
tus on page 16.
TEXT indicator
Shows when radio text is received.
STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
•
•
•
•
Signal level indicator
Shows the signal strength of the selected
frequency.
Frequency indicator
Frequency scale
Current time
Using the touch panel keys
Recalls the desired broadcast frequency.
Holding down the key stores the current
tuning frequency in memory.
➲ For details, refer to Recalling broadcast
frequencies on the next page.
Switches the band between FM1, FM2 and
FM3. Also switches to the FM band while
receiving the MW/LW band.
Switches to the MW/LW band while receiv-
ing the FM band.
Searches for an RDS station using PTY infor-
mation.
➲ For details, refer to Searching for an RDS
station using PTY information on page
15.
Raises frequencies in one-step increments.
Holds down the key and the tuner will scan
frequencies until a broadcast strong
enough for good reception is found.
Lowers frequencies in one-step increments.
Holds down the key and the tuner will scan
frequencies until a broadcast strong
enough for good reception is found.