Choosing the input signal, Using phase control, Listening to your system 06 – Pioneer SC-LX82 User Manual
Page 65: Phase control off

Listening to your system
06
65
En
Choosing the input signal
On this receiver, it is possible to switch the input signals
for the different inputs as described below.
1
SC-LX82:
SC-LX72:
1
Set the remote control to the receiver operation
mode.
2
Press SIGNAL SEL to select the input signal
corresponding to the source component.
Each press cycles through the options as follows:
•
AUTO – The receiver selects the first available signal
in the following order:
HDMI; DIGITAL; ANALOG.
•
ANALOG – Selects an analog signal.
•
DIGITAL – Selects an optical or coaxial digital signal.
•
HDMI – Selects an HDMI signal.
2
•
PCM – For PCM input signals.
3
The receiver selects
the first available signal in the following order:
HDMI;
DIGITAL.
When set to
DIGITAL, HDMI or AUTO (only selected
DIGITAL or HDMI), the indicators light according to the
signal being decoded, as follows:
–
2 DIGITAL lights with Dolby Digital decoding.
–
2 DIGITAL PLUS lights with Dolby Digital Plus
decoding.
–
2 TrueHD lights with Dolby TrueHD decoding.
–
DTS lights with DTS decoding.
–
DTS HD lights with DTS-HD decoding.
–
MSTR lights with DTS-HD Master Audio decoding.
–
96/24 lights with DTS 96/24 decoding.
–
WMA9 Pro lights to indicate that a WMA9 Pro signal
is being decoded.
•
HDMI is not assigned by default. To select an HDMI
signal, conduct the input setup procedure (see
The
Input Setup menu on page 47).
Better sound using Phase Control and
Full Band Phase Control
This receiver is equipped with the two types of functions
that correct phase distortion and group delay: Phase
Control and Full Band Phase Control. Activating Full
Band Phase Control is strongly recommended because it
also involves the effects of Phase Control. For details on
each of these two features, refer to the following
explanations.
Using Phase Control
During multichannel playback, LFE (Low-Frequency
Effects) signals as well as low-frequency signals in each
channel are assigned to the subwoofer or the other most
appropriate speaker. At least in theory, however, this type
of processing involves a group delay that varies with
frequency, resulting in phase distortion where the low-
frequency sound is delayed or muffled by the conflict
with other channels. With the Phase Control mode
switched on, this receiver can reproduce powerful bass
sound without deteriorating the quality of the original
sound (see illustration below).
Phase Control OFF
• Rhythms blurred and difficult to hear
• Bass sound with loss of depth
• Sound of musical instruments with no reality
Note
1 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats.
The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Master Audio, SACD and DVD Audio (including 192 kHz). With other digital signal formats, set to
ANALOG (the
MULTI CH IN, TUNER and PHONO).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital
connections (page 34) and set the signal input to
DIGITAL.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the
HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver.
3 • This is useful if you find there is a slight delay before
AUTO recognizes the PCM signal on a CD, for instance.
• When
PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
SOURCE
TV
RECEIVER
VOL
VOL
TVCONTROL
CH
RECEIVER
THX
PQLS
MPX
PGM
MENU
STEREO
SIGNAL SEL SLEEP
AUDIO
INFO
DIMMER
A.ATT
SBch
MCACC
HDMI OUT
DISP
AUTO/ALC/
DIRECT
STANDARD ADV SURR
SIGNAL SEL
1
2
3
HDMI OUT
SLEEP
MCACC
INPUT
SELECT
SIGNAL SEL
4
5
6
DIMMER
A.ATT
SBch
7
8
9
CLASS
CH LEVEL
D.ACCESS
/CLR
0
ENTER
SIGNAL SEL
4
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX
PQLS
CH
RECEIVER
TV CTRL
TV/DTV
RECEIVER
Front speaker
Subwoofer
Sound
source
Sound muffled due
to a delay in time
Listening
position
SC-LX82_LX72.book Page 65 Thursday, April 23, 2009 7:05 PM