Pioneer SC-LX82 - Manual (Page 106)

The Advanced MCACC menu 11
106
En
Chapter 11:
The Advanced MCACC menu
Important
• The procedure for setting the receiver operation
mode differs for the remote controls included with
the SC-LX82 and SC-LX72. For the SC-LX82’s remote
control, set the remote control operation selector
switch to
RECEIVER. For the SC-LX72’s remote
control, press the button. When “set the
remote control to the receiver operation mode” is
indicated in these instructions, use the respective
procedure described above.
Making receiver settings from the
Advanced MCACC menu
The Advanced MCACC (Multi Channel ACoustic
Calibration) system was developed in Pioneer’s
laboratories with the aim of making it possible for home
users to perform adjustments of the same level as in a
studio easily and with high precision. The acoustic
characteristics of the listening environment are
measured and the frequency response is calibrated
accordingly to allow high precision, automatic analysis
and optimal calibration of the sound field to bring it
closer to a studio environment than ever before.
Furthermore, while it was previously difficult to eliminate
standing waves, this receiver is equipped with a standing
wave control function using a unique process to perform
acoustic analysis and reduce their influence.
This section describes how to calibrate the sound field
automatically and fine-adjust the sound field data
manually.
SC-LX82:
SC-LX72:
1 Switch on the receiver and your TV.
Use  RECEIVER to switch on. 1
• If headphones are connected to the receiver,
disconnect them.
2 Set the remote control to the receiver operation
mode, then press HOME MENU.
2
A Graphical User Interface (GUI) screen appears on your
TV. Use
/// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
• Press HOME MENU at any time to exit the HOME
MENU.
• The screen saver will automatically appear after five
minutes of inactivity.
3 Select ‘Advanced MCACC’ from the HOME MENU,
then press ENTER.
4 Select the setting you want to adjust.
• Full Auto MCACC – See Automatically setting up for
surround sound (Auto MCACC & Full Band Phase
Control) on page 45 for a quick and effective
automatic surround setup.
RECEIVER
DVD
RECEIVER SOURCE MAIN
MULTI
OPERATION
ZONE2 3
VIDEO1
iPod
USB
MULTI CH
GALLERY
HOME MEDIA
INPUT SELECT
CD
PHONO IN
TUNER
VIDEO2 HDMI
BD TV DVR
CD-R
RECEIVER
SOURCE TV RECEIVER
VOL
VOL
TV CONTROL
CH
RECEIVER
AUDIO
PARAMETER
TOP MENU
BAND
iPod CTRL
PTY
SEARCH
LIST TOOLS
HOME
MENU
STATUS PHASE CTRL CH LEVEL
T.EDIT
GUIDE
VIDEO
PARAMETER
INPUT MUTE
TUNE
TUNE
PRESET PRESET
MUTE
ENTER
RETURN
HOME
MENU
ENTER
RETURN
Note
1 Make sure not to switch off the power when using the HOME MENU.
2 You can’t use the HOME MENU when the HOME MEDIA GALLERY or iPod/USB input function is selected (in either the main or sub zone).
When you set ZONE 2, ZONE 3 or ZONE 2&3 to ON (page 88), you can’t use the HOME MENU.
DVD BD DVR HDMI
TV CD CD-R
TUNER
HOME MEDIA
GALLERY
iPod USB
INPUT
RECEIVER SOURCE
VIDEO 1 VIDEO 2
RECEIVER
T.EDIT
GUIDE TOP MENU
BAND
RETURN
iPod CTRL
HOME
MENU
LIST TOOLS
AUDIO
PARAMETER
ENTER
TUNE
PRESET PRESET
TUNE
VIDEO
PARAMETER
PTY
SEARCH
HOME
MENU
RETURN
ENTER
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
HOME MENU
A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
1.Advanced MCACC
A/V RECEIVER
Exit Return
SC-LX82_LX72.book Page 106 Thursday, April 23, 2009 7:05 PM