Selecting the multichannel analog inputs, Playing an ipod, Playing back audio files stored on an ipod – Pioneer SC-LX82 User Manual
Page 50: Basic playback 05

Basic playback
05
50
En
• Set the HDMI parameter in
Setting the Audio options
on page 85 to
THROUGH if you want to hear HDMI
audio output from your TV or flat screen TV (no sound
will be heard from this receiver).
• If the video signal does not appear on your TV or flat
screen TV, try adjusting the resolution settings on
your component or display. Note that some
components (such as video game units) have
resolutions that may not be converted. In this case,
use an analog video connection.
• You can’t hear HDMI audio through this receiver’s
digital out jack.
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player as
above, you must select the analog multichannel inputs
for surround sound playback.
1
1
Make sure you have set the playback source to the
proper output setting.
For example, you might need to set your DVD player to
output multichannel analog audio.
2
Set the remote control to the receiver operation
mode, then use INPUT SELECT to select MULTI CH IN.
You can also use the
INPUT SELECTOR dial on the front
panel.
• Depending on the DVD player you’re using, the
analog output level of the subwoofer channel may be
too low. In this case, the output level of the subwoofer
can be increased by 10 dB in the
Multi Ch In Setup
in
Other Setup. For details, see Multi Channel Input
Setup on page 125.
Playing an iPod
This receiver has a dedicated iPod terminal that will allow
you to control playback of audio content from your iPod
using the controls of this receiver.
2
1
Switch on the receiver and your TV.
See
Connecting an iPod on page 42.
• It is also possible to operate the iPod on the iPod
itself, without using the TV screen. For details, see
Switching the iPod controls on page 51.
2
SC-LX82 only:
Set the remote control operation
selector switch to SOURCE.
3
Press iPod USB on the remote control to switch the
receiver to the iPod/USB.
Loading appears in the GUI screen while the receiver
verifies the connection and retrieves data from the iPod.
When the display shows
iPod top menu you’re ready to
play music from the iPod.
3
Main Zone:
Sub Zone:
Playing back audio files stored on an iPod
To navigate songs on your iPod, you can take advantage
of the GUI screen of your TV connected to this receiver.
4
You can also control all operations for music in the front
panel display of this receiver.
Note
1 • When playback from the multichannel inputs is selected, only the volume and channel levels can be set.
• You can’t listen to your speaker B system during playback from the multichannel inputs.
• With
MULTI CH IN inputs, it is possible to play pictures simultaneously. For details, see Multi Channel Input Setup on page 125.
2 • This system is compatible with the audio and video of the iPod nano, iPod fifth generation (audio only), iPod classic, iPod touch and iPhone.
However, some of the functions may be restricted for some models. The system is not compatible with the iPod shuffle.
• Compatibility may vary depending on the software version of your iPod and iPhone. Please be sure to use the latest available software
version.
• iPod and iPhone are licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the equalizer off before connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of
recorded material resulting from the iPod failure.
• When listening to a track on the iPod in the main zone, it is possible to control the sub zone, but not to listen to a different track in the sub
zone from the one playing in the main zone.
3 The controls of your iPod will be inoperable when connected to this receiver.
4 • Note that characters that cannot be displayed on this receiver are displayed as
#.
• This feature is not available for photos or video clips on your iPod. To display video clips, switch iPod operation to the iPod (see
Switching
the iPod controls on page 51).
• If you leave the GUI screen for over five minutes, the screen saver will appear.
iPod
iPod CTRL
Playlists
Artists
Albums
Songs
Podcasts
Genres
Composers
Audiobooks
1
/ 9
A/V RECEIVER
iPod
[
Playlists
]
[
Ar tists
]
[
Albums
]
[
Songs
]
[
Podcasts
]
[
Genres
]
[
Composers
]
[
Audiobooks
]
1/9
SC-LX82_LX72.book Page 50 Thursday, April 23, 2009 7:05 PM