Pioneer SC-LX82 - Manual (Page 31)

Connecting your equipment 03
31
En
• The input functions below are assigned by default to
the receiver’s different input terminals. Refer to The
Input Setup menu on page 47 to change the
assignments if other connections are used.
For example, the BD terminal is fixed to
BD input; no
other audio and video signals can be input to this
terminal.
About HDMI
1
The HDMI connection transfers uncompressed digital
video, as well as almost every kind of digital audio that the
connected component is compatible with, including
DVD-Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby
TrueHD, DTS-HD Master Audio (see below for
limitations), Video CD/Super VCD and CD. See
About the
video converter on page 27 for more on HDMI
compatibility.
This receiver incorporates High-Definition Multimedia
Interface (HDMI™) technology.
This receiver supports the functions described below
through HDMI connections.
• Digital transfer of uncompressed video (contents
protected by HDCP (1080p/24, 1080p/60, etc.))
• Deep Color signal transfer
2
• x.v.Color signal transfer 2
• Input of multi-channel linear PCM digital audio
signals (192 kHz or less) for up to 8 channels
• Input of the following digital audio formats:
– Dolby Digital, Dolby Digital Plus, DTS, High bitrate
audio (Dolby TrueHD, DTS-HD Master Audio), DVD-
Audio, CD, SACD (DSD signal), Video CD, Super VCD
• Synchronized operation with components using the
KURO LINK function (see KURO LINK on page 81)
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
“x.v.Color” and x.v.Color logo are trademarks of Sony
Corporation.
Input function
Input Terminals
Digital HDMI Component
DVD COAX-1 IN 1
BD ( BD)
TV/SAT OPT-1
DVR OPT-2 IN 2
VIDEO 1 OPT-3 IN 3
VIDEO 2
COAX-3 a
a. SC-LX82 only
HDMI 1 ( HDMI-1)
HDMI 2 ( HDMI-2)
HDMI 3 ( HDMI-3)
HDMI 4
(front panel)
( HDMI-4)
CD COAX-2
CD-R/TAPE OPT-4
Note
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content
Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI HDMI) to do so. A DVI connection,
however, does not support audio signals. Consult your local audio dealer for more information.
• If you connect a component that is not compatible with HDCP, an
HDCP ERROR message is displayed on the front panel display. Some
components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video
this is not a malfunction.
• Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.
• This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage of these formats, however,
make sure that the component connected to this receiver also supports the corresponding format.
2 Signal transfer is only possible when connected to a compatible component.
SC-LX82_LX72.book Page 31 Thursday, April 23, 2009 7:05 PM